24.7
+91 0281 2589039
whatsapp +91 94277 26335
Quick Inquiry

O rings

Home   >   Engineering Division   >   Tool room and Industrial hardware consumables   >   O Rings

About O-Rings

An O–Ring is a mechanical gasket which is in the torus shape. This o-Ring is a loop of elastomer with a round cross section which is designed to be fitted in a groove and compressed during assembly between two or more parts. This will create a seal at the interface. This O-Ring is also called as a Packing or Toric Joint.

These O-Rings are used in applications where relative motion is created between the parts and the o-Ring. Some of the applications of O-Rings in dynamic applications include rotating pump shafts and hydraulic cylinder pistons.

In general, these O-Rings are used to maintain fluid or air IN and OUT of a defined space. O-Rings can be used for more than preventing air or fluid from passing, they are also utilized for driving a belt, decorative objects on furniture, cups and automotive parts.

Our company is an important O-Rings manufacturers, suppliers and exporters. O-Rings provided by us can be used in both static and dynamic applications. These types of rings are one of the common types of seals which are used in machine designs.

O-Rings offered by our company are inexpensive, easy to manufacture and reliable.

About O-Rings

O-Rings, We provide

  • Viton (FKM) O Rings
  • Silicone (VMQ) O Rings
  • Neoprene (CR) O Rings
  • EPDM O Rings
  • Perfluoroelastomer (FFKM) O Rings
  • Aflas O Rings
  • Fluorosilicone (FVMQ) O Rings
  • Hypalon® (CSM) O Rings
  • Polyurethane O Rings
  • Natural Rubber O Rings
  • Automotive O Rings
  • O Rings Cords

How are O-Rings produced?

We occupy a best position among O-Rings suppliers and exporters. O-Rings produced by us are made by,

  • Extrusion
  • Injection molding
  • Pressure molding
  • Transfer molding

We offer O-Rings in different metric and inch standard sizes. The size of an O-Ring is specified by the inside diameter and the cross section diameter. If the O-Rings are used in high-temperature applications, then the rings needed to be mounted in an agilely compressed state.

The O-Rings are typically selected based on the chemical compatibility, application temperature, sealing pressure, lubrication requirements, durometer, size, and cost. Standard O-Rings are available by us, as O-Rings exporters and manufacturers, in all sizes. Our company O-Rings are simplest and most common forms of seals which are normally used for wide range of static and dynamic applications.

The design of an o-Ring is straightforward. O-Rings India is both economical and reliable for sealing purposes. O-Rings will give a perfect seal because it has a tendency of returning to its original shape when the cross-section is compressed. This is the basic reason for the most popular uses of O-Rings.

O-Rings seals are generally made of rubber. In some cases, these rings can be made with plastic or metal. Temperature range also plays a major role in the material selection of O-Rings. This is because; some applications require a material with low temperature whereas some other requires material with high temperature.

In our site, we provide catalogues to the customers for selecting the O-Rings. Customers can get their required O-Rings through this.